Spec Sheet
The information below is specific to the Puch - 50 Maxi N %28Rigid Rear%29, showing anything for service information to the amount of fork oil or even the tyre pressures. If you would like to contribute any missing information, please use the edit link below.
Back.Bike Info
CC:
50
Service
Points Gap mm:
0.35-0.45mm
Spark Plugs Gap (mm):
0.4-0.5mm
Transmission oil:
automatic transmission fluid
Transmission oil quantity:
0.22 litres
Tyre Pressure Back Bar / psi:
32
Tyre Pressure Front Bar / psi:
25
Brakes
Front:
Drum
Rear:
Drum
Dimensions
Fuel Capacity:
3.2 litres
Length:
1,700mm
Seat Height:
735mm
Wheelbase:
1,120mm
Width:
690mm
Electrics
Voltage:
6v
Bulb-Headlight:
18/18 watt
Charging System:
6v-flyweel magneto
Ignition:
magneto ignition
Ignition Timing:
0.8-1.2-BTDC
Spark Plugs:
bosch W175-t1 or champion L86
Engine
Type:
Air Cooled 2 Stroke
Bore x Stroke:
38 x 43mm
Carburation:
bing 1/14/152
Compression Ratio:
11:1
Transmission
Clutch Type:
centrifugal
Final Drive:
chain with split link
Transmission:
single speed automatic
Misc.
Frame:
monocoque pressed steel
Motorcycle Style:
moped
Power
Fuel Consumption:
135 mpg
Max Power Output:
2.2 hp at 4,500 rpm
Max Torque:
at-3600 rpm
Top Speed:
30 mph
Suspension
Front:
friction damped telescopic forks
Rear:
rigid
Tyres
Front:
2.00-17
Rear:
2.00-17
Add information to the model
All information presented on the website is given to the best of our knowledge at the given time. All information is intended to only as a guide. A major Japanese manufacturer's quote:
We reserve the right to vary our specification with or without notice, and as such time and in such manner as we think fit.