Spec Sheet
The information below is specific to the Aprilia - 50 SR 50 R %28LC%29 %28VFB00%29, showing anything for service information to the amount of fork oil or even the tyre pressures. If you would like to contribute any missing information, please use the edit link below.
Back.Aprilia - SR 50 R (LC) (VFB00) 07
_(VFB00_VFD00)_04-08/SR_50_R_Factory_(LC)_(VFB00_VFD00)_04-08_1.jpg)
Bike Info
CC:
50
Service
2 Stroke Tank - Litres:
2.18 pt (1.2 )
Coolant:
50/50 mix
Cooling System (litres):
2.18 pt (1.2 )
Final Drive grade:
SAE 75W - 90
Final Drive quantity:
4.58 cu. in (75 cu. cm)
Fork oil grade:
SAE 5W or 20w
Idle Speed (rpm):
1700 ± 100 rpm
Spark Plugs Gap (mm):
0.6 – 0.7 mm (0.024 – 0.028 in)
Two Stroke Oil:
A.P.I. SJ
Tyre Pressure Back Bar / psi:
2.0 bar/ 30 psi
Tyre Pressure Back - Pillion Bar / psi:
2.2 bar / 32 psi
Tyre Pressure Front Bar / psi:
1.8 bar / 28 psi
Tyre Pressure Front - Pillion Bar / psi:
1.8 bar / 28 psi
Brakes
Front:
Disc
Rear:
Disc
Brake fluid:
DOT 4
Front Disc Size:
7.5 in (190 mm)
Front-Pistons-per-caliper:
2
Rear Disc Size:
7.5 in (190 mm)
Rear-Pistons-per-caliper:
2
Dimensions
Fuel Capacity:
12.7 pt (7.0 )
Ground Clearance:
3.94 in (100 mm)
Height:
44.09 in (1,120 mm)
Length:
73.23 in (1,860 mm)
Reserve Fuel Capacity:
2.18 pt (1.2 )
Seat Height:
31.30 in (795 mm)
Wet Weight:
238 lb (108 kg)
Wheelbase:
50.79 in (1,290 mm)
Width:
27.76 in (705 mm)
Electrics
Voltage:
12v
Battery:
12 V - 9 Ah
Bulb-Headlight:
12 V - 35 W H11
Charging System:
12 V - 165 W
Ignition:
7.5 A - 15 A
Ignition Timing:
20°± 3° before TDC
Main Fuse:
7.5 A - 15 A
Spark Plugs:
CHAMPION RN1C
Engine
Type:
Liquid Cooled 2 Stroke Reed Valve Flat Single
Bore x Stroke:
1.57 in / 1.55 in (40 mm / 39.3 mm)
Compression Ratio:
12.1 ± 0.5 : 1
Displacement:
3 cu. in (49.38 cu. cm)
Lubrication System:
Oil injection
Starting:
Elecrtic and kick start
Transmission
Clutch Type:
Automatic, dry centrifugal clutch
Final Drive:
Gears
Primary Drive:
V-belt
Transmission:
Automatic converter, stepless
Misc.
Exhaust:
1 into 1 with Catalyser
Frame:
Split single beam
Motorcycle Style:
Scooter style moped
Place of Manufacture:
Italy
Suspension
Front:
Telescopic fork
Front Travel:
3.54 in (90 mm)
Rear:
Hydraulic monoshock
Rear Travel:
2.72 in (69 mm)
Tyres
Front:
130/60-13 Tubeless
Rear:
130/60-13 Tubeless
Wheels
Bearing Front Left:
12x32x10
Bearing Front Right:
12x32x10
Front:
Alloy
Rear:
Alloy
Add information to the model
All information presented on the website is given to the best of our knowledge at the given time. All information is intended to only as a guide. A major Japanese manufacturer's quote:
We reserve the right to vary our specification with or without notice, and as such time and in such manner as we think fit.